Our Deep Cast Clear Casting Resin has been especially formulated for deep casting in one pour making it ideal for resin river tables, also known as resin live edge tables

FREE DELIVERY TO UK MAINLAND

Deep Cast is an unaccelerated clear epoxy casting resin system, which offers a long open time for bubble removal and precise article placement. It also avoids high exothermic reaction and the resulting shrinkage after curing.

This resin can be readily pigmented by the addition of our resi-TINT & resi-TINT MAX range of acrylic pigments, resi-TINT+ metallic powders or resi-METAL metallic pigments.

  • Perfect for resin river tables
  • Inbuilt UV inhibitors
  • Water clear casting resin
  • Mix and pour up to 12 litres or up to 50mm deep in one pour
  • Decorative castings
  • Making paperweights
  • Excellent visual properties

We are proud to partner with Mirka Tools to bring you the complete range of resin and wood finishing equipment. This includes sanding machines, dust extractors and consumables such as sanding discs, polishes and accessories. We can equip you with the complete solution to finishing your Deep Cast wood and resin project. More info here.



Video of Deep Cast (CER) Resin River Table (Resin Live Edge Table)

<

Specifications

  Mix ratio    by volume: 2 litres resin to 1 litre hardener
  Surfaces   canvas, wood, MDF & glass
  Curing time    can be de-moulded in 3-4 days at 18°C depending on volume cast, full cure in 10-14 days
  Coverage   1 litre of the mixed product will cover 1m²@ 1mm thick
  Pot Life   10 hours at 18°C (500g mixed mass)
  Shelf life   one year in sealed containers

 

Mixing

The mixing ratio must be accurately followed to achieve perfect results. It is not possible to change the ratio which would result in the resin not drying properly and lower mechanical properties.

2 parts resin to 1 part hardener by volume provides a hard casting once cured. Pour the hardener first and then the resin. The mixed components should be thoroughly stirred for 3-4 minutes to ensure an even consistency. The maximum volume that can be poured in one go is 12 litres.

Application

The mixed resin can be tinted with our resi-TINT pigments, resi-METAL or resi-TINT+ Metallic Powders to make your artwork pop, it can then be poured into a mould, the mould can be  plastic or made of silicone rubber. Moulding can be carried out by gravity or under vacuum. Temperature should be between 18-25ºC with humidity level below 70%. A 2:1 mix will provide a hard casting suitable for manufacture of fancy shapes, decorative items etc. Once the resin is mixed and poured into the mould gently pass warm air from a heat gun or hair dryer on slowest speed setting, this will assist in removal of any bubbles generated during mixing.

Health & Safety

Our resins are 100% synthetic, they DO NOT contain animal parts or any organic content.
No testing is done on animals whatsoever. Our resins are Vegan friendly and cruelty free.

Although our resins are formulated with the most modern and safest epoxy chemicals available, all epoxies are chemicals and should be managed and handled with proactive safety hygiene and responsible care.

  • Always wear nitrile gloves (or use a specialist resin barrier cream)
  • Wear a respirator when sanding cured resin
  • It is advisable to work in a well ventilated room
  • We advise the use of safety goggles
  • Avoid skin contact (if resin gets on skin wash with plenty of soap & water)
  • DO NOT eat, drink or smoke while working
  • In case of eye contamination wash with plenty of water for 15 minutes and consult medical advice immediately

Adding inks/paints/mica powder/glitter to epoxy resin will change its properties and may reduce its non-toxicity. If you use alcohol inks DO NOT use a flame to remove bubbles, as alcohol is flammable.

Deep Cast (CER) Technical Datasheet PDF

Deep Cast (CER) Safety Datasheet PDF 

Guide to Making a Resin River Table

Resin & Wood Coffee Table Case Study

 

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Deep Cast Clear Casting Resin (CER)

  • Brand: Eli-Chem
  • Product Code: Deep Cast - select from 300ml. 750ml, 1.5L, 3L, 7.5L, 15L, 37.5L
  • Availability: 79
  • £26.70 Including VAT


Available Options


DEEP CAST RESIN QUANTITY CALCULATOR

TO FIND OUT HOW MUCH DEEP CAST RESIN YOU WILL NEED FOR YOUR CASTING PROJECT, ENTER THE DIMENSIONS & UNITS BELOW. FOR RIVER TABLES PLEASE TAKE AN AVERAGE WIDTH ACROSS THE RIVER ONLY.

Enter number values in the fields below









People who viewed this product also liked

resi-TINT Acrylic Resin Art Pigment 29.5ml

resi-TINT Acrylic Resin Art Pigment 29.5ml

A selection of 18 bright and beautiful resi-TI..

£10.98 Including VAT

Mirka PS 1437 Electric Polisher 150mm

Mirka PS 1437 Electric Polisher 150mm

The Mirka® PS 1437 Polisher features a powerful, h..

£420.48 Including VAT

Mirka DEROS 5650CV Random Sander Deco Solution Kit with 50 ABRANET Discs + Hose

Mirka DEROS 5650CV Random Sander Deco Solution Kit with 50 ABRANET Discs + Hose

This solution kit includes the DEROS sander with a..

£521.72 Including VAT

Deep Dive Extra Deep Encapsulating Casting Resin

Deep Dive Extra Deep Encapsulating Casting Resin

Deep Dive is a casting resin that produces a cryst..

£91.98 Including VAT

Tags: deep cast, casting resins, , casting resin, river table, live edge resin table, water clear resin, artwork resin, clear resin, resin river table, epoxy resin, casting resin, resin live edge table, low viscosity, CER, deepcast, deep pour, fill-it, fill it,