SuperCast™ Clear Artwork Casting Resin is a two component epoxy resin that produces an optically clear, high gloss finish and is particularly suited to resin art and shallow mould castings (jewellery items, flower-setting & paperweights etc).
Eli-Chem’s SuperCast™ self-levels to form a
perfectly flat and shiny finish. Once cured, it provides a clear art coating
resin that won’t shrink or distort over time. It can be applied by pouring or
brush/roller and cures at ambient temperatures. It has excellent UV resistance,
clarity and transparency making the resin system suitable for the protection of
just about any creative project.
- Solvent and odour free
- User friendly
- Self-Levelling formula
- Mixed viscosity 2,600 mPa.s>/li>
- Optical clarity (colour no. Gardner max.1)
- Exceptional UV resistance
- Non-flammable
SuperCast™ Pack Size |
Coverage at 0.5 mm thick |
---|---|
1kg | 0.572 m² |
5kg Kit | 2.86 m² |
10kg Kit | 5.72 m² |
Specifications |
|
Mix ratio | by volume: 100 parts resin to 100 parts hardener by weight: 100 parts resin to 90 parts hardener |
Surfaces | canvas, wood, MDF & glass |
Curing time | touch dry in 4-6 hours at 22°C, full cure in 3-5 days |
Coverage | 1 litre of the mixed product will cover approx. 1.43 m²@ 0.5 mm thick (1kg = 1 litre) |
Pot Life | 30-45 minutes at 22°C (250g mixed mass) |
Shelf life | one year in sealed containers |
Mixing
By volume: 100 parts resin to 100 parts hardener
By weight: 100 parts resin to 90 parts hardener
The mixing ratio must be accurately followed. It is not possible to change the ratio. This will result in lower mechanical properties and the resin not drying properly. The mixture must be thoroughly stirred to ensure full homogeneity. Epoxy systems tend to heat up much faster in a pot than as a thin film. Mix only the necessary amount usable within the pot life. Mix until it is streak-free, uniform colour & consistency (usually 2-3 mins).
Application
Apply by hand pouring or brush/roller. SuperCast™ can be tinted any colour with the addition of polymer pigments available in all solid and translucent colours.
LEVEL: Ensure your piece is perfectly flat and level, otherwise the resin will run to the lowest point leaving too little resin at the corners or run of the edges. Large canvasses should be supported underneath to prevent sagging and resin pooling.
BUBBLES: Any bubbles created by hand mixing can be easily popped by using a sharp object or by passing warm air over the surface of the resin with a blowtorch or hot air dryer on slow speed settings. Do not hold closer than 30cm to your artwork otherwise you risk creating ripples and dimples in the resin finish. If you use alcohol inks DO NOT use a flame to remove bubbles, the alcohol content in the inks is flammable.
Health & Safety
Our resins are 100% synthetic, they DO NOT contain animal parts or any organic content.
No testing is done on animals whatsoever. Our resins are Vegan friendly and cruelty free.
Although our resins are formulated with the most modern and safest epoxy chemicals available, all epoxy resins are chemicals and should be managed and handled with proactive safety hygiene and responsible care.
- Always wear nitrile gloves (or use a specialist resin barrier cream)
- Wear a respirator when sanding partially cured resin
- It is advisable to work in a well ventilated room
- We advise the use of safety goggles
- Avoid skin contact (if resin gets on skin wash with plenty of soap & water)
- DO NOT eat, drink or smoke while working
- In case of eye contamination wash with plenty of water for 15 minutes and consult medical advice immediately
- Acute Tox. 4: H302; Aquatic Chronic 3: H412; Skin Corr. 1A: H314; Skin Sens. 1A: H317
Adding inks/paints/mica powder/glitter to epoxy resin will change its properties. If you use alcohol inks DO NOT use a flame to remove bubbles, as alcohol is flammable.
SuperCast Technical Data Sheet
SuperCast® Clear Art Coating Resin
- Brand: Eli-Chem
- Product Code: SCAST - select from 1kg, 5kg, 10kg
- Availability: Out Of Stock
-
£24.96 Including VAT
Available Options
People who viewed this product also liked
Large Letter Mould & MasterCast 1-2-1 Clear Art Coating Resin Tester
Large Alphabet Letter Moulds are now availabl..
£19.50 Including VAT
totalCAST Clear Art Casting Resin
totalCAST Clear Art Resin is a revolutionary hybri..
£15.00 Including VAT
resi-TINT+ Metallic Powder
resi-TINT+ is a new range of metallic powders that..
£20.52 Including VAT
resi-BLAST Art Dispersion Media 25ml
resi-BLAST is an innovative, single part liquid ad..
£18.42 Including VAT
resi-TINT MAX NEON Pigment Powder 5g & 50g
7 fluorescent pigment powders to add bright and vi..
£15.00 Including VAT
Rapido Instant Setting Art Resin 500g
Rapido is an extremely fast setting, pourable resi..
£24.60 Including VAT
MasterCast 1-2-1 Clear Art Coating Resin
MasterCast 1-2-1 Clear Artwork Coating Resin is a ..
£25.92 Including VAT
Tags: SuperCast, Super Cast, epoxy coating resin, clear resin, art resin, artwork resin, resin art, clear resins, resin art tester, coat it, coat-it